Digital Projection M-Vision User Manual

58
SPECIFICATIONS
Electrical
I/O - Control and Status
9-Pin, 2-Way RS232
I/O - Power Input
IEC-320-C14receptacle
Projector Control
• Hard wired via RS-232 w Sanyo emulation
• IR Remote - for set up only
Zoom/Focus/Offsets
Manually lens shift, Manual zoom/focus
Projection Modes
Front/ Rear
Video Modes
PC modes
System Software
Includes Sanyo emulation
Ballast
UART control , synchronized
Power
100V - 240V, 50/60Hz; 350W max, <2W Standby
Safety
UL 60950 -1, RoHS compatible
EMI
FCC Class A
Software
Basic User Command List
See User Manual
Fault Tolerant Ballast Control
Standard ballast control
Mechanical
Engine weight
20 lbs.
Dimensions
351(W) x 394(D) x 165(H) mm ( 14.2 x 15.5 x 6.5 inches)
Enclosure
Table or rack mounted (open rack only)
Adjustable feet
2” max travel
Reliability
Operating Temperature
10°C to 35°C ambient
Storage
-20°C to 60°C, 90% RH
Lamp Life
2000 hours Normal
Lamp Module
User replaceable
Electronics
Modular replaceable
Table 7-1: Projector Specifications

Digital Projection M-Vision Specifications

General

Brand	Digital Projection
Model	M-Vision
Category	Projector
Language	English