EasyManua.ls Logo

Dinolift 240RXT - Inspections

Dinolift 240RXT
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DINO 240RXT
14
6 INSPECTIONS
A thorough inspection of the lift must be carried out at least once every twelve (12) months.
The inspection shall be carried out by a technically trained person who is familiar with the operation and
structure of the lift.
Draw up a protocol of the inspections and keep it always with the unit stored in the space reserved for it.
Carry out he inspections on regular basis throughout the service life of the lift.
The inspection must be carried out within twelve (12) months from the first or the previous inspection.
If the lift is used under extreme conditions, intervals between the inspections shall be reduced.
The overall operating condition of the lift as well as the condition of the safety-related control devices
shall be established in the regular inspections. Particular attention shall be paid to changes which affect
the operational safety.
In connection with the regular inspection, it shall be established to what extent the lessons and practical
experience gained from the previous inspection can be implemented for even better safety.
NOTE! Primarily the national legislation must be followed!
Regular inspections and service measures are described more thoroughly in the chapter "Service-
and maintenance".

Table of Contents

Other manuals for Dinolift 240RXT

Related product manuals