Dinolift 240RXT - Instructions for Service and Maintenance; General Service Instructions

DINO 240RXT
37
17 INSTRUCTIONS FOR SERVICE AND MAINTENANCE
17.1 GENERAL SERVICE INSTRUCTIONS
- carry out the servicing and inspection of the lift in accordance with the instructions
- when it comes to more demanding repair works turn to a specialist or contact the distributor or
the manufacturer of the lift
- do not modify the lift without written consent from the manufacturer
- any such faults which may affect the operational safety of the unit must be repaired before the
lift is next used
- do not let oil spill on the ground
- keep the lift clean, especially the platform
- clean up the lift before service and inspection
- use genuine spare parts
- support the platform, boom system, articulated arms and support outriggers in a position in
which the load does not rest on the structure under repair or cause any other danger (e.g.
transport position or use of supporting structures)
- the device may be lifted with two slings, each with a load-carrying capacity of at least 4,000 kg
or slinging at the four lugs (see picture)
Be careful not to damage the device during the lifting!