DINO 240RXT
32
13 MANUAL RELEASE OF THE PARKING BRAKES
The parking brakes on both rear wheels can be released mechanically if they fail to be provided with the
required hydraulic pressure.
Instructions for mechanical release of the parking brakes:
Remove the plug
Screw a hex screw M12x50 with a nut M12 and a washer to the
thread inside the opening.
Turn the screw and the nut hand-tight.
To open the brake, tighten the nut with a wrench about 1 round.
Note! Remember before towing that the lift has no brakes once they have been mechanically released.
To Next Page
Loading...
