DINO 240RXT
77
S26: Button for driving with raised boom. As the button is depressed, the boom can be raised during the
driving to the level position or the machine can be driven with the boom in the horizontal position.
During the driving the outrigger limit-switches are bypassed with this button.
S27: The drive mode selector switch. This switch enables selection between various drive modes for
different driving situations.
Position 1 = 2-wheel steering.
Position 2 = 4-wheel steering.
Position 3 = crab steering.
Only the foremost axle with respect to the drive direction will turn as the 2-wheel steering mode is
selected.
As the 4-wheel steering mode is selected both axles will turn, but the rear axle will turn to the
opposite direction.
As the crab steering mode is selected all wheels turn to same direction.
S28: Pedal. Act as a Dead man switch. Always depress the pedal before activating any movement. The
movements can be operated only after this.
S29: Control switch for platform swing.
S31: Retracting the telescope After the SR3 has tripped, the telescope can be retracted by depressing the
button.
F13: Automatic fuse for platform swing (4A).
To Next Page
Loading...
