Dinstar DAG2000-24S - Page 41

4 Configurations on Web Interface
DAG2000-24/32SUser Manual
Copyright©2011-2020 Dinstar
36
Timeout for off-hook
Mainly used to define a timer that when the user is off
hook an analog phone without dial any digits
Timeout for dialing
With the help of dialing timeout, you can limit the time
between two digits while users are typing the digits
of a
number through an extension. If the timeout expires, the
gateway will consider the dialing has finished and will try
to send message to SIP server. Default value is 4 seconds.
Timeout for
answer(Outgoing
call)
This parameter determines how long the caller party will
wait for answer when making outgoing calls
through a
phone.
Timeout for
answer(Incoming
call)
This parameter determines how long the phone rings when
there are incoming calls
No RTP Detected
If this parameter is enabled, the situation will be detected
when there is no RTP packets received during the set time
period.
Period without RTP
Packet
The time period when there is no RTP packets received.
SUBSCRIBE for MWI
(Message Waiting
Indicator)
MWI is aimed to notify user that there is new voicemail. It is
realized in the way of NOTIFY.
MWI Subscription Expires
The expiry time of MWI subscription; Default value is 3600s.
Voicemail User ID
The user ID used to access to voicemail
Visual MWI Type There are two visual MWI Type, namely NEON and FSK