Dinstar DAG2000-24S - 4 Configurations on Web Interface; 4.9 Advanced; 4.9.5 SIP Parameter

4 Configurations on Web Interface
DAG2000-24/32SUser Manual
Copyright©2011-2020 Dinstar
39
(5) Dial *200# on the extension which is connected to DAG2000-32S, and then dial
voicemail user ID and password for authentication. After that user will hear voice message.
Digitmap is used for number dialing of calls through FXS ports of the DAG2000 device.
Supported
Objects
Digit 0-9
T Timer
DTMF
A digit, a timer, or one of the symbols of
A, B, C, D, #, or *
Range [ ]
One or more DTMF symbols enclosed in the [], but
only one DTMF symbol can be selected
Range ()
One or more expressions enclosed the
(), but only one can be selected
Separator | Separate expressions or DTMF symbols.
Subrange -
Two digits separated by hyphen (-) which matches any
digit between and including the two digits.
Wildcard x Matches any digit of 0 to 9
Modifiers . Matches 0 or more times of the preceding element
Modifiers ? Matches 0 or 1 times of the preceding element
4.9.5 SIP Parameter
SIP parameters includeattended transfer trigger, early media, session timer, heartbeat interval
and so on.