Dinstar DAG2000-24S - 4 Configurations on Web Interface; 4.10 Call & Routing; 4.10.1 Port Group

4 Configurations on Web Interface
DAG2000-24/32SUser Manual
Copyright©2011-2020 Dinstar
50
Secondary NTP
server port
The service port of secondary NTP server; Default port is 123
SYN Interval
The interval to synchronize the time of the DAG2000-4S/8S. Default
value is 3600s.
Time Zone
The time zone of the device; Default configuration is United States
central time, Chicago.
Daylight Saving
Time
Enable or disable daylight saving time
Daily Reboot Whether to enable daily reboot
Reboot time The time to reboot the device daily
WEB Port The web port of the device; Default port is 80
SSL Port The SSL port; Default is 443
Telnet port Listening port of telnet service; Default port is 23
【Note 】After Web port and Telnet port are configured, please restart the device for the
configurations to take effect.
4.10 Call & Routing
4.10.1 Port Group
When two or more FXS ports need to register with a same SIP account, you can group the
ports together and then set an account for the group on the Call & Routing
 Port Group
page.
Parameters of port group include registration, primary display name, primary SIP user id,
primary authentication ID and password, secondary display name, secondary SIP user id,
secondary authentication ID and password, off-hook auto dial, auto dial delay time, port select,
etc.