EasyManua.ls Logo

Dinstar DAG2000-24S - 4 Configurations on Web Interface; 4.13 Security; 4.13.4 Encrypt; 4.14 Tools

Dinstar DAG2000-24S
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Configurations on Web Interface
DAG2000-24/32SUser Manual
Copyright©2011-2020 Dinstar
65
AuthPassword: the password used to authenticate.
Privacy Type: Choose DES, AES or AES 128 as encryption type.
Privacy Password: the encryption password.
4.12.3 Syslog
Syslog is a standard for message logging. It allows separation of the software that generates
messages, the system that stores messages, and the software that reports and analyzes
messages. It also provides a means to notify administrators of problems or performance.
Syslog levels include: EMERG, ALERT, CRIT, ERROR, WARNING, NOTICE, INFO and
DEBUG.
Figure 4-32 Configure Syslog Parameters
When the DAG2000 device registers to SIM Cloud server, local syslog will be changed to
non-configurable and all logs will be stored on the Cloud server.
4.12.4 Provision
Provision is used to make the DAG2000 device automatically upgrade with the latest
firmware stored on an http server, an ftp server or a tftp server. Please refer to the Instruction
for Using Provision.

Table of Contents