Dinstar DAG2000-24S - 4 Configurations on Web Interface; 4.12 Management; 4.12.1 TR069

4 Configurations on Web Interface
DAG2000-24/32SUser Manual
Copyright©2011-2020 Dinstar
60
Figure 4-29 Add Tel  IP/Tel Callee Number Manipulation
Table 4-19 Explanation of Parameters for Tel  IP/Tel Callee Number Manipulation
Index
The index of this manipulation; range is
from 0 to 127. Each index
cannot be used repeatedly. 0 is the highest priority
Description Description of this manipulation; it is used to identify this manipulation.
Calls From Determine the calls come from a port or a port group.
Caller Prefix
Set a prefix for caller number. The prefix’s length is less than or equal to
that of the caller number, which helps to match the caller number of this
call. If caller number is 2001, the caller prefix can be 200 or 2. ‘any’
means match any caller number.
Callee Prefix
Set a prefix for called number. The prefix’s length is less than or equal to
called number, which helps to match the called number. If called number
is 008675526456659, the called prefix can be 0086755 or 00. ‘any’
means match any called number.
Calls to
Determine the call is routed to a port, a port group, an IP trunk or a SIP
server.
Stripped Digits
from Left
The number of digits which are lessened from the left of the called
number
Stripped Digits
The number of digits which are lessened from the right of the called