Dinstar UC100 - Current Call

UC100 User Manual
18
Copyright @ 2011-2015 Dinstar
Belong to
Parameter
Include
FXS
State
Ready, Unready
Config Status
OK, Config Failed
SIP Register Status
Registered, Unregistered
FXO
State
Ready, Unready
Config Status
OK, Config Failed
SIP Register Status
Registered, Unregistered
Hook State
Onhook, Offhook
Line State
Online, Offline
GSM
State
Ready, Unready
Channel State
OK, Config Failed
SIP Register Status
Registered, Unregistered
Signal
: No SIM card has been inserted
: Signal Strength
4.3.4 Current Call
Click Status  Current Call, and the following interface will be displayed. On the interface, the source,
destination, calling number, called number, start time, answer time, state and duration of the current real-
time call are shown. If there is no current call, no information will be shown.