Dinstar UC100 - Fxs;Fxo

UC100 User Manual
36
Copyright @ 2011-2015 Dinstar
Negotiation Priority
negotiation.
Assume local device supports PCMA, PCMU, G.729 and G.723, while the
remote device supports G.723 and G.729.
If remote device is taken as codec negotiation priority, G.723 will be the codec
mode, since the remote device supports G.723 and G.729 and G.723 is prior to
G.729.
4.6.2 FXS/FXO
On the Profile  FXS/FXO interface, you can configure the driving parameters of FXS port and the FXO
port.
Profile  FXS Interface: