dji FLIP - Dji Rc-N3; Activation

DJI RC-N3
1. Remove the control sticks from the storage slots and mount them on the remote
controller.
2. Pull out the mobile device holder. Choose the appropriate remote controller cable
based on the port type of your mobile device (the cable with a USB-C connector is
connected by default). Place your mobile device in the holder, then connect the end
of the cable without the remote controller logo to your mobile device. Make sure your
mobile device is securely in place.
1
2
• If a USB connection prompt appears when an Android mobile device is used,
select the option to charge only. Other options may cause the connection to fail.
• Adjust the mobile device holder to make sure your mobile device is rmly
secure.
Activation
The aircraft requires activation before rst use. Press, then press and hold the power
button to power on the aircraft and remote controller respectively, and then follow the
onscreen prompts to activate the aircraft using DJI Fly. An internet connection is required
for activation.
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 13