dji FLIP - C0 Certification

6.10 C0 Certication
DJI Flip is compliant with C0 certication requirements. There are some requirements
and restrictions when using DJI Flip in EU member states, EFTA member states (EFTA,i.e.
Norway, lceland, Liechtenstein, Switzerland) and Georgia.
Model DF1A0424
UAS Class C0
Maximum Take-O Mass (MTOM) 249 g
Maximum Propeller Speed 20500 RPM
MTOM Statement
The MTOM of DJI Flip (Model DF1A0424) is 249 g to comply with C0 requirements.
You must follow the instructions below to comply with the MTOM requirements.
• DO NOT add any payload to the aircraft except the items listed in the List of Items
including qualied accessories section.
• DO NOT use any non-qualied replacement parts, such as intelligent ight batteries
or propellers, etc.
• DO NOT retrot the aircraft.
List of Items, including qualied accessories
Item Model Number Dimensions Weight
Propellers 4022F 101.6×55.8 mm
(diameter×thread
pitch)
0.45 g (each
piece)
Intelligent Flight Battery BWX141-3110-7.16 79.7×57.8×27.4 mm Approx. 83.5 g
ND Filters Set*
(ND 16/64/256)
N/A 19.6×14.2×4.6 mm 0.34 g (individual)
microSD Card* N/A 15×11×1.0 mm Approx. 0.3 g
* Not included in the original packaging. For how to install and use the ND Filters Set, refer to the
Product Information for the ND Filters Set.
List of Spare and Replacement Parts
• DJI Flip Propellers
• DJI Flip Intelligent Flight Battery
DJI Flip User Manual
82 © 2025 DJI All Rights Reserved.