EasyManua.ls Logo

dji FLIP - Remote Controller Alert; Optimal Transmission Zone

dji FLIP
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Blinking Pattern Battery Level
51-75%
26-50%
0-25%
Remote Controller Alert
The remote controller sounds an alert during RTH, which cannot be cancelled. The remote
controller sounds an alert when the battery level of the remote controller is low. A low
battery level alert can be cancelled by pressing the power button. When the battery level
is critically low, the alert cannot be cancelled.
There will be an alert if the remote controller is not used for a period while it is powered
on but is not connected to the aircraft or the DJI Fly app on the mobile device. The remote
controller will automatically power o after the alert stops. Move the control sticks or
press any button to cancel the alert.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the
antennas are positioned in relation to the aircraft as illustrated below. If the signal is
weak, adjust the remote controller orientation, or y the aircraft closer to the remote
controller.
Optimal Transmission
Zone
Weak Signal
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 75

Table of Contents

Related product manuals