Auto Landing
1. If conditions are safe to land, tap
, then tap and hold to conrm.
2. Auto landing can be canceled by tapping .
3. If the Downward Vision System is working normally, Landing Protection will be
enabled.
4. Motors will stop automatically after landing.
• Choose an appropriate place for landing.
Starting/Stopping the Motors
Starting the Motors
Perform one of the Combination Stick Commands (CSC) as shown below to start the
motors. Once the motors have started spinning, release both sticks simultaneously.
Stopping the Motors
The motors can be stopped in two ways:
Method 1: When the aircraft has landed, push the throttle stick down and hold until the
motors stop.
Method 2: When the aircraft has landed, perform one of the CSC as shown below until
the motors stop.
DJI Flip User Manual
32 © 2025 DJI All Rights Reserved.
To Next Page
Loading...
