dji FLIP - Palm Takeoff;Landing and Smart Snaps

Palm Takeo/Landing and Smart Snaps
• Make sure to follow local privacy laws and regulations when using Smart Snaps.
• Smart Snaps only supports the tracking of people.
• Palm takeo and landing are supported for palm control, mobile app control,
and RC control. The dierence is that when using RC control, Smart Snaps for
palm control are not supported, and subject conrmation is not required before
takeo.
1. Power on DJI Flip. Keep it still and wait for the system self-diagnostics to complete.
2. Make sure to leave enough room for maneuvering according to the preset parameters
such as distance and height. Press the mode button to select your desired mode.
3. Follow the steps below for palm takeo.
1 2
3 4
a. Palm takeo requires subject conrmation. Hold the sides of the aircraft body
from below with the camera facing the subject. Make sure that your hand does
not block the camera and there are no obstacles obstructing the takeo.
• DO NOT place your ngers within the rotation range of the propellers!
DJI Flip User Manual
28 © 2025 DJI All Rights Reserved.