3 Flight Operation
DJI Flip supports multiple control methods for various scenarios to meet your needs.
Make sure you are familiar with the notice and usage for each control method before
ight.
• DO NOT touch DJI Flip mid-ight. Otherwise, DJI Flip may drift and a collision
may occur.
• DO NOT y DJI Flip immediately after it has been in a collision or severely
knocked or shaken. DJI Flip may not be able to perform stable ight.
3.1 Palm Control
It is recommended to click the link below or scan the QR code to watch the tutorial video.
https://www.dji.com/ip/video
In Palm Control, palm takeo and landing is supported. You can use the mode button
on DJI Flip to achieve multiple Smart Snaps. DJI Flip will y while recording automatically
after subject conrmation. Connect to the DJI Fly app using the Wi-Fi function to adjust
the parameters for each mode. The default settings are used as an example.
Notice
• Power o the remote control devices connected to the aircraft before using
Palm Control.
• Make sure that the ight environment meets the ight requirements and that
you can control and retrieve DJI Flip immediately when an issue occurs or in an
emergency. In situations where DJI may not be able to analyze the cause of the
incident, it may not be possible for DJI to provide warranty and other aftersales
services.
• Before using Palm Control, make sure that DJI Flip has previously connected to
DJI Fly on your smartphone via Wi-Fi. When using Palm Control without the app,
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 25
To Next Page
Loading...
