dji FLIP - Hyperlapse

◆
When the subject is in the air.
◆
When the subject is moving fast.
◆
The lighting is extremely dark (<15 lux) or bright (>10,000 lux).
• DO NOT use QuickShots in places close to buildings or where the GNSS signal is
weak. Otherwise, the ight path will become unstable.
• Make sure to follow local privacy laws and regulations when using QuickShots.
Using QuickShots
1. Tap the Shooting Mode icon on the right side of the camera view and select
QuickShots .
2. After selecting one sub-mode, tap the plus icon or drag-select the subject on
the screen. Then tap to begin shooting. The aircraft will record footage while
performing a preset ight movement according to the option selected, and generate
a video afterwards. The aircraft will y back to its original position once recording is
nished.
3. Tap
or press the Flight Pause button on the remote controller once. The aircraft will
exit QuickShots immediately and hover.
Hyperlapse
Hyperlapse takes a certain number of photos according to the time interval, and then
compiles these photos into a video of a few seconds. It is especially suitable for recording
scenes with moving elements, such as trac ow, clouds drifting, and sunrises and
sunsets.
Using Hyperlapse
1. Tap the Shooting Modes icon from the camera view and select Hyperlapse
.
2. Select the Hyperlapse mode. After setting the related parameters, tap the shutter/
record button
to begin the process.
3. Tap or press the Stop button on the remote controller, the aircraft will exit
Hyperlapse and hover.
DJI Flip User Manual
38 © 2025 DJI All Rights Reserved.