dji FLIP - Sensing System

smooth ceramic tiles, garage oors with insucient light, and grass blowing
in the wind.
◆
Flying over obstacles without clear texture, such as large rocks, or reective
or monochrome surfaces, such as raised tiles.
◆
Flying over small or ne obstacles, such as power lines and tree branches.
◆
Flying over surfaces that resemble at ground, such as trimmed and at
shrubs, at tree tops, and hemispherical ground.
• In the following situations, Landing Protection may be triggered by mistake
and DJI Flip is unable to land. You can perform palm landing or land DJI Flip
manually.
◆
Flying over surfaces that the vision system may confuse for water, such as
wet ground and areas with puddles.
◆
Flying over at surfaces, but there are surfaces with clear texture (oblique
surfaces or stairs) nearby.
4.5 Sensing System
1
23 3
1. Forward 3D Infrared Sensing System
*
2. Downward Vision System
3. Downward Infrared Sensing System
* The 3D infrared sensing system meets the human eye safety requirements for Class 1 laser
products.
DJI Flip User Manual
48 © 2025 DJI All Rights Reserved.