dji FLIP - Auto Landing; Trigger Method; Landing Protection

[2] If the forward 3D infrared sensing system detects an obstacle ahead, the aircraft will brake and
hover, and you will need to take control.
4.4 Auto Landing
In some situations, DJI Flip will land automatically with the landing protection function
supported.
• DO NOT prevent DJI Flip from landing continuously due to a critical low battery.
Otherwise, the battery will be damaged or DJI Flip will crash.
Trigger Method
In the following situations, DJI Flip will land automatically:
• DJI Flip reaches above the Home Point after RTH is triggered.
• DJI Flip has a critical low battery level.
• In Palm Control and Mobile App Control, positioning fails or DJI Flip detects a collision
but does not crash.
Landing Protection
Landing Protection activates during auto landing
The specic actions of DJI Flip are as follows:
• If the ground is determined suitable for landing, DJI Flip will land directly.
• If the ground is determined unsuitable for landing, DJI Flip will hover and wait for pilot
conrmation. You can perform palm landing or land DJI Flip manually.
• If DJI Flip fails to determine whether the ground environment is suitable for landing,
DJI Fly will display a landing prompt when DJI Flip descends to a certain distance from
the ground. Conrm the landing prompt and DJI Flip will land. You can also perform
palm landing or land DJI Flip manually.
• Landing Protection only assists in determining the landing environment. Pay
attention to the surrounding environment during landing to ensure safety.
• In the following situations, Landing Protection may be unavailable and DJI Flip
may land directly on unsuitable ground:
◆
Flying over monochrome, reective, or low-light surfaces, a large area of
surfaces without clear texture, or surfaces with dynamic texture, such as
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 47