dji FLIP - Controlling the Gimbal and Camera; Flight Mode Switch; Flight Pause;Rth Button

Controlling the Gimbal and Camera
1
2
4
3
1. Gimbal Dial: Control the tilt of the gimbal.
2. Record Button: Press once to start or stop recording.
3. Camera Control Dial: Use to adjust the zoom by default. The dial function can be set
to adjust the focal length, EV, shutter speed, and ISO.
4. Focus/Shutter Button: Press halfway down to auto-focus and press all the way down
to take a photo.
Flight Mode Switch
Toggle the switch to select the desired ight mode.
C N S
Position Flight Mode
S Sport Mode
N Normal Mode
C Cine Mode
Flight Pause/RTH Button
Press once to make the aircraft brake and hover in place.
Press and hold the button until the remote controller beeps and starts RTH. The aircraft
will return to the last recorded Home Point. Press the button again to cancel RTH and
regain control of the aircraft.
DJI Flip User Manual
68 © 2025 DJI All Rights Reserved.