Battery Level LEDs
Blinking Pattern Battery Level
76-100%
51-75%
26-50%
0-25%
Remote Controller Alert
The remote controller beeps to indicate an error or warning. Pay attention when prompts
appear on the touchscreen or in DJI Fly.
Slide down from the top of the screen and select Mute to disable all alerts, or slide the
volume bar to 0 to disable some alerts.
The remote controller sounds an alert during RTH, which cannot be cancelled. The remote
controller sounds an alert when the battery level of the remote controller is low. A low
battery level alert can be cancelled by pressing the power button. When the battery level
is critically low, the alert cannot be cancelled.
There will be an alert if the remote controller is not used for a period of time while it is
powered on but is not connected to the aircraft. It will automatically power o after the
alert stops. Move the control sticks or press any button to cancel the alert.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the
antennas are positioned in relation to the aircraft as illustrated below. If the signal is
weak, adjust the remote controller orientation, or y the aircraft closer to the remote
controller.
• DO NOT use other wireless devices operating at the same frequency as the
remote controller. Otherwise, the remote controller will experience interference.
DJI Flip User Manual
70 © 2025 DJI All Rights Reserved.
To Next Page
Loading...
