• During palm landing, DJI Flip may ascend slightly and then land on the
palm. Keep your hand still and extend your ngers during the process.
6. Connect DJI Flip to DJI Fly to view the footage and create short videos.
• In Follow, Spotlight, and DirectionTrack modes, DJI Flip will hover in place if
the camera loses the subject while recording. Run DJI Fly on your smartphone
via Wi-Fi to connect to DJI Flip mid-ight. The smartphone must have been
connected to DJI Fly previously in order to connect. In the Controls view, make
sure that the task has already stopped, select Manual Control from the mode
list, and then land DJI Flip using the virtual joysticks.
3.2 Mobile App Control
It is recommended to click the link below or scan the QR code to watch the tutorial video.
https://www.dji.com/ip/video
To use Mobile App Control, connect DJI Flip to the DJI Fly app on the smartphone via
Wi-Fi and control DJI Flip in the app. In Mobile App Control, all the functions for Palm
Control are available. You can set parameters and perform Smart Snaps in the app. More
functions such as manual control, audio recording, and voice control are also supported.
Notice
• Power o the remote control devices that are connected to the aircraft before
using Mobile App Control. If not powered o, the aircraft will disconnect from
the other devices automatically when the smartphone is connected via Wi-Fi and
the Controls view in the app is opened.
• Make sure to y in an open and unobstructed environment without signal
interference. Otherwise, the app may disconnect from DJI Flip which may aect
ight safety.
DJI Flip User Manual
30 © 2025 DJI All Rights Reserved.
To Next Page
Loading...
