Charging the Battery
Fully charge the battery before each use. It is recommended to use the charging devices
provided by DJI or other chargers that support the USB PD fast charging protocol.
Using a Charger
• The battery cannot be charged if the aircraft is powered on.
The table below shows the battery level during charging.
Blinking Pattern Battery Level
0-50%
51-75%
76-99%
100%
• The blinking frequency of the battery level LEDs diers depending on the USB
charger used. If the charging speed is fast, the battery level LEDs will blink
quickly.
• Four LEDs blinking simultaneously indicates the battery is damaged.
Using the Charging Hub
It is recommended to click the link below or scan the QR code to watch the tutorial video.
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 57
To Next Page
Loading...
