dji FLIP - Quickshots

◆
When the subject is in the air.
◆
When the subject is moving fast.
◆
The lighting is extremely dark (<15 lux) or bright (>10,000 lux).
• DO NOT use MasterShots in places close to buildings or where the GNSS signal
is weak. Otherwise, the ight path may become unstable.
• Make sure to follow local privacy laws and regulations when using MasterShots.
Using MasterShots
1. Tap the Shooting Mode icon on the right side of the camera view and select
MasterShots .
2. After drag-selecting the subject and adjusting the shooting area, tap to begin
recording and the aircraft will start ying and recording automatically. The aircraft will
y back to its original position once recording is nished.
3. Tap
or press the Flight Pause button on the remote controller once. The aircraft will
exit MasterShots immediately and hover.
QuickShots
QuickShots include multiple shooting modes. The aircraft automatically records according
to the selected shooting mode and generates a short video.
Notice
• Make sure there is sucient space when using Boomerang. Allow a radius of at
least 30 m (99 ft) around the aircraft and a space of at least 10 m (33 ft) above
the aircraft.
• Make sure there is sucient space when using Asteroid. Allow at least 40 m
(131ft) behind and 50 m (164 ft) above the aircraft.
• Use QuickShots at locations that are clear of buildings and other obstacles.
Make sure there are no people, animals, or other obstacles in the ight path.
• Always pay attention to objects around the aircraft and use the remote
controller to avoid collisions or the aircraft being obstructed.
• DO NOT use QuickShots in any of the following situations:
◆
When the subject is blocked for an extended period of time or outside the
visual line of sight.
◆
When the subject is similar in color or pattern with the surroundings.
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 37