dji FLIP - Remote Controller Warnings; EASA Notice; Original Instructions

Remote Controller Warnings
DJI RC 2
The remote controller indicator will glow red after disconnecting with the aircraft. DJI Fly
will issue a warning prompt after disconnecting from the aircraft. The remote controller
will beep and power o automatically after disconnecting from aircraft and with no
operation for a long time.
DJI RC-N3
The battery level LEDs will start blinking slowly after disconnecting from the aircraft.
DJI Fly will issue a warning prompt after disconnecting from the aircraft. The remote
controller will beep and power o automatically after disconnecting from the aircraft and
with no operation for a long time.
• Avoid interference between the remote controller and other wireless
equipment. Make sure to turn o the Wi-Fi on nearby mobile devices. Land the
aircraft as soon as possible if there is interference.
• Release the control sticks or press the ight pause button if an unexpected
operation occurs.
• When using Mobile App Control, DJI Fly will issue a warning prompt after
disconnecting from the aircraft.
EASA Notice
Make sure to read the Drone Information Notices document included in the package
before use.
Visit the link below for more EASA notice information on traceability.
https://www.easa.europa.eu/en/document-library/general-publications/drones-
information-notices
Original Instructions
This manual is provided by SZ DJI Technology, Inc., and the content is subject to change.
Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street,
Nanshan District, Shenzhen, China, 518055.
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 83