5.2 DJI RC-N3
Operations
Powering On/O
Press the power button once to check the current battery level.
Press, then press and hold to power the remote controller on or o.
Charging the Battery
Connect the charger to the USB-C port on the remote controller.
• Fully charge the remote controller before each ight. The remote controller
sounds an alert when the battery level is low.
• Fully charge the battery at least once every three months to maintain the
battery’s health.
Controlling the Gimbal and Camera
1. Gimbal Dial: Control the tilt of the gimbal.
2. Customizable Button: Press and hold the customizable button and then use the
gimbal dial to zoom in or out.
DJI Flip User Manual
© 2025 DJI All Rights Reserved. 73
To Next Page
Loading...
