dji RONIN 4D - Page 48

DJI Ronin 4D User Manual
47
©
2022 DJI All Rights Reserved.
Frame Guide: The Frame Guide can be enabled or disabled in the liveview and the settings will not aect
the recorded footage. The Frame Guide is only used to monitor the liveview and adjust the frame. The
Frame Guide consists of dierent aspect ratios which can be adapted to lm and television standards.
The default frame guide includes: 16:9, 17:9, 2.35:1, 2.39:1. Tap Manage to edit the frame guide list.
Frame guides can be customized. Tap Add, input the frame guide, and tap Add to List.
Frame Guide Transparency: Slide the bar to adjust the transparency of the frame guide. The range is
from 0 to 100%, ranging from pure dark to transparent.
Safety Zone: The safety zone is enabled by default. The safety zone is helpful when adjusting the frame,
allowing users to reserve space for added information such as captions or icons.
Safety Zone Ratio: Indicates the ratio of the frame guide and can be set from 80% to 100% by adjusting
the slider. The default ratio is 80% and the step value is 1%. The safety zone is the same as the frame
guide when the safety zone ratio is set to 100%.
Monitor LUT: Tap to set the monitor LUT. Monitor LUT can only aect the main monitor and the HDMI
output of the main body. Set Recording LUT for LUT of recorded video. LUT color includes Rec.709,
HLG, D-Log, and LOOK. Refer to the LOOK section for more information.
Center Marker: Indicates the center position of the liveview. The Center Marker is set to o by default
and can be switched to Small or Large.
LCD Brightness: Tap to adjust the brightness of the main monitor.
Rotate: Tap Rotate turn the display upside down. Note that the button features will change according to
the rotation.