DMC SuperSigma2 QRM User Manual

SuperSigma2 QRM PMS – V01.02.02 17-1-2020 Page 16 (58) ©2019 DMC GmbH Herten Germany
8.3 Display Features Setup
Ref
Parameter
Submenu ref.
Sub menu description
Range & Action
1
Service timer
1. Svc interval
Set the time interval for next service.
(40 Hours before service is needed a
spanner icon is shown at power up
indicating service is required)
0– 32767 Hr.
2. Count hours
Set to count work or key hours
Work / Key Hrs.
3. Reset timer
Resets the service interval timer
To confirm press SEL
4. Svc time
Indication of the actual counter
value
Indication only
2
Hours counter
1.=Key, 2.=Work
Select to indicate work or key hours
Select ↑↓ and confirm
SEL
3
Information field
1. Adjust field
Free 2x9 character field to show a
customised text.
↑↓ for position, + / –
change value, SEL to
return to menu
4
Pin codes
1. Service timer
Sets pin code for service timer access
2. Information field
Sets pin code for information field
access
3. Reset all pin
codes
Reset all pin codes
(Only with DMC master
code)
5
About
SW version & date
Indication of the software version &
date
Indication only
6
Return to main
screen
-
Select to return to the main menu
Select ↑↓ and confirm
(SEL)

DMC SuperSigma2 QRM Specifications

General

Brand	DMC
Model	SuperSigma2 QRM
Category	Industrial Equipment
Language	English