SuperSigma2 QRM PMS – V01.02.02 17-1-2020 Page 2 (58) ©2019 DMC GmbH Herten Germany
Fix pms motor error code list
Corrected mechanical drawing Size 1
V02.08.01. Improved the inching in traction, added Shared Line contactor
compatible with Control Via CAN HMI, enable the creep ramp time for traction
and pump, add serial numbers visible in About menu of calibrator.
Updated error code tables, EMC and Layout
V02.08.02 Improved F30 (overspeed) management (pump-traction). Increased
available output voltage for AC motor(pump.traction). For traction: improved
inching, footbrake operation, scale of accel pot in traction speed mode. Added
adj 17 in traction for torque mode 3 for better end of braking in footbrake
operation. Changed some default values. Included Park Icon for display..
Improved F12 and F13 management. Improved PC interface settings download.
Improved the function inhibit of change of direction.
Update Layout and Cross-references. Minor textual errors corrected
Update Nominal RMS motor current for tuning
Match tables to ADVANCED MANUAL V 1.5.3
Match tables to ADVANCED MANUAL V1.5.5
Match tables to ADVANCED MANUAL V1.5.6
To Next Page
Loading...
Need help?
General
