DMG JUNIOR 4.0 - Page 36

User
Manual
File Name
Revision
Date
Page
93010350.EN_A_Junior 4.0 User
Manual_240828_v1.0 - VVVF
1.0
28/08/2024
36 / 90
Parameter
Description
Navigation
Values
Default
value
Type 2: COP enabling To enable calls, the corresponding input of
the 16 IN card must be closed
Type 3: Enable COP + LOP: to enable calls, the corresponding
input of the 16 IN card must be closed (disabling the floor)
Shaft
Protection
Protection of compartment and doors.
For description, refer to Annex X.
▲
▼
Increase Decrease
No
Type 1
Type 2
Type 3
Type 4
No
Integrated Load
Weighing
Enable function for Integrated load Weighing.
It is mandatory a calibration procedure (§ test 22)
◄►
Selection
No;
Yes
No