DMG JUNIOR 4.0 - Page 60

User
Manual
File Name
Revision
Date
Page
93010350.EN_A_Junior 4.0 User
Manual_240828_v1.0 - VVVF
1.0
28/08/2024
60 / 90
N.
Fault
Type
Description
Remedy
Cod 200: Check wiring TOC- ELGO (Can
signals)
Cod 254: Noise on eSGC signal’s cable.
Put a relay on TOC box to open the load
line when eSGC output is not active.
Cod 255: Check mounting of the
magnetic band and mounting direction as
well.
This symbol means a blocking fault: switch off main power and then switch it
on again to put the lift back in service.