DOM Roq - Page 35

DOM Roq® Long Plate with Screw Connection Through Inside Plate
35
DOM Roq® Smart Lock
DOM Roq® Fig. 29: Long Plate with Screw Connection Through Inside Plate
20. Place the motor unit on the base plate and press lightly (>Click< , base plate is
locked with the 3 protruding brackets). (M)
Attention! Damage due to improper fitting.
When fitting the motor unit, make sure that the components are in the correct
position (inner part cylinder, motor unit cardan shaft). Do not join the motor unit
and the base plate together with violence or great force.
DOM accepts no liability for damage caused by improper installation.
21. Turn the handwheel to check whether the bolt can be moved in and out of the lock
and whether the deadbolt can be moved. (N)
(This checks whether the cross of the cardan shaft has been inserted positively into
the matching inner part of the cylinder).
22. Motor unit is attached and ready for commissioning (from page 53).