102
All Units
SEPTEMBER 2009 Printed in U.S.A.
COPYRIGHT 2009, Heil Environmental
SAFETY SYMBOLS AND DEFINITIONS
Listed below are the definitions for the various levels of safety hazards. It is important that the operators
of this equipment read and understand safety messages as they relate to this equipment operation.
• DANGER – indicates an imminently hazardous situation, which if not avoided WILL result in
DEATH or SERIOUS INJURY if you don’t follow proper instructions.
• WARNING – indicates an imminently hazardous situation, which if not avoided COULD result in
DEATH OR SERIOUS INJURY if you don’t follow proper instructions.
• CAUTION – indicates an imminently hazardous situation, which if not avoided MAY result in
MINOR to MODERATE INJURY if you don’t follow proper instructions.
• NOTICE – means unit or other property may be damaged if these instructions are not followed.
The following safety messages are generally in the Operator’s Manual for each specific unit or are
generic safety messages if an Operator’s Manual does not have these safety messages. Other safety
alert messages may be in other sections of the Parts and Maintenance/Adjustment Manual, in other
sections of the Parts and Service Manual or in an Operator’s Manual. You must read and obey all safety
alert messages in any manual produced by Heil to support your unit.
Failure to follow all instructions and safety precautions in this manual, in the Maintenance and
Adjustment (or Service) Manual, in other manufacturer’s manuals and on the safety decals
attached to the product could result in serious injury or death to operators or bystanders and/or
damage to property.
DO NOT operate this vehicle before you READ and UNDERSTAND this Operator’s Manual, the
Parts and Maintenance/Adjustment (or Service) Manual for this unit, other applicable
manufacturer’s manuals and the safety decals on the product.
Each operator of this unit must read and understand all directions in this manual before they first
operate this vehicle.
Keep this manual in the cab for new operators and to remind all operators about safe use.
Do not operate the unit or perform repair or maintenance procedures on
the unit until you read and understand all of the instructions in this manual. Failure to do so may
result in injury or death to operators or bystanders.
Do not operate the unit or perform repair or maintenance procedures on
the unit until you read and understand the instructions in this manual. Failure to do so may result
in damage to the unit or other property.
NOTE: If you do not understand a procedure or instruction, tell the owner or the designated
person immediately. Do not operate the unit if you do not understand all procedures and
instructions in this manual. The owner or designated person can contact your Heil dealer or Heil
for additional help. See page (given in specific Operator’s Manual) for contact information.
To Next Page
Loading...