Dover HEIL DuraPack 5000 - Lock-out;Tag-out Procedures

To Next Page

To Previous Page

107

All Units

Printed in U.S.A. SEPTEMBER 2009

LOCK-OUT/TAG-OUT PROCEDURES

Put the unit in a lock-out condition:

• BEFORE you enter the unit’s body.

• BEFORE you climb or stand on the body or roof.

• BEFORE you do maintenance or repair procedures on the unit.

► Follow These Steps:

1. TURN the ignition switch to OFF.

2. APPLY the brakes. MAKE SURE the brakes do not let the unit move and they work properly.

3. CHOCK all wheels.

4. REMOVE the ignition key from the cab.

5. Put a LOCK-OUT TAG onto the STEERING WHEEL.

Lock-out (Do Not Operate) Tag

NOTE: You can order lock-out tags (Part No. 212-1586) through your Heil Dealer or through Heil.