110
All Units
SEPTEMBER 2009 Printed in U.S.A.
COPYRIGHT 2009, Heil Environmental
OIL CAN LUBRICANT RECOMMENDATION
Use only non-detergent engine oil to lubricate all moveable mechanical parts not furnished with grease
fittings. Apply sufficient oil to give good lubrication, but do not bathe parts in oil. Always wipe off excess.
GREASE LUBRICANT RECOMMENDATION
Use a grease gun. Before engaging grease gun, clean the fitting. Always pump enough grease to purge
the joint of contaminated grease and wipe off the excess.
WINCH GEAR OIL
Use AGMA Grade 5 EP (90wt.) for a 8,000 lb. winch and AGMA Grade 7 EP (140 wt.) for a 12,000 lb.
winch.
To Next Page
Loading...