108
All Units
SEPTEMBER 2009 Printed in U.S.A.
COPYRIGHT 2009, Heil Environmental
IMPORTANT!
• Before starting any maintenance, study this section
of the manual.
• Read all safety messages and decals on the unit.
• Clear the area of other persons before performing
any maintenance.
• Know and understand safe use of all controls.
• It is your responsibility to understand and follow
manufacturer’s instructions on equipment and care.
SAFETY DECALS ON THE UNIT
Make sure you can read all safety and instruction decals. Clean decals if you cannot read the words. See
page 115 for directions on cleaning decals.
Decals must be replaced if the decal is damaged, the decal is missing, or the decal is not readable.
If a decal is on a part that is replaced, make sure a new decal is installed on the new part. See the Parts
and Maintenance/Adjustment (Service) manual for a complete decal kit and individual decals. Order the
decal kit or individual decals from your Heil Dealer or from Heil.
To Next Page
Loading...