Dräger P3U - Submenu Datalogger

55
The menu » Information «
Submenu » Datalogger «
The submenu » Datalogger « contains the functions for interrogating the Datalogger.
Datalogger status
This function is active only if the Polytron 7000 transmitter is equipped with the data
dongle 83 17 618, see page 29.
— This function displays the status of the Datalogger and the Eventlogger.
● Select the menu items » Information «, » Datalogger « and » Datalogr status « in
this order, pressing the » « key after each selection.
— The current status of the Datalogger and the Eventlogger is displayed:
— Activating / deactivating the Datalogger: see page 78.
— Activating / deactivating the Eventlogger: see page 78.
Show graph
This function is active only if the Polytron 7000 transmitter is equipped with the data
dongle 83 17 618, see page 29.
— The measured values of the sensor are displayed graphically on a time axis of
15 minutes.
● Select the menu items » Information «, » Datalogger « and » Show graph « in this
order, pressing the » « key after each selection.
Datalogr. : on or off (the Datalogger is on or off)
Evntlogr. : on or off (the Eventlogger is on or off)
OK
OK