Dräger P3U - Overview; The Menu Settings

The menu » Settings «
60
The menu » Settings «
The menu » Settings « contains all functions needed for individual configuration of the unit.
Overview
Information
Calibration
Settings Settings
Instrument
page 61
Instrument
Communication
page 69
Pump
1)
1)
This menu function can be executed only if the Polytron 7000 transmitter is equipped with a pump module, see page 33.
page 61
Sensor
page 75
Alarm
2)
2)
This menu function can be executed only if the Polytron 7000 transmitter is equipped with a relay module, see page 31.
page 62
Datalogger
page 78
Passwords
page 65
Date and time
page 65
Time format
page 66
Language
page 66
Function key
page 67
Device init
page 67
SW Dongle
page 68
Communication
Hart interface
3)
3)
This menu function can be executed only if the Polytron 7000 transmitter is equipped with the appropriate interface card.
page 69
Analogue interface
3)
page 70
LON Interface
3)
page 74
Sensor
Change sensor
page 75
Set Autocal.
page 75
Sensor test
page 76
Sensor lock
page 76
EC–H
2
S
4)
4)
The sensor shown in the overview serves only as an example and may differ from the sensor actually installed in the unit.
page 77
Datalogger
Datalogr. on/off
5)
5)
This menu function can be executed only if the Polytron 7000 transmitter is equipped with the data dongle 83 17 618, see page 29.
page 78
Cfg Datalogger
5)
page 78
Clear Datalogger
5)
page 80
Clear Eventlogr.
5)
page 80