Drobo 5D3 - Page 105

Drobo 5D3 User Guide 105
Drive
Lights
Green: No action is required. All drives are healthy.
Solid Yellow: Add a drive or replace the current drive with a larger drive soon.
Your Drobo device is running out of disk space. See Adding Capacity (or
Drives).
Blinking Yellow and Green: Do not remove these drives or power down. Your
Drobo device is working to protect your data.
Solid Red: Add a drive or replace the current drive with a larger drive
immediately. Your Drobo device is critically low on space. See Adding
Capacity(or Drives)
Blinking Red: Replace this drive immediately. This drive has failed. See Adding
Capacity(or Drives)
Power
Light
Green: The power is on and your Drobo device is ready.
Yellow: Your Drobo device is in the process of powering on.
Red: Your Drobo device has overheated. Safely power down your Drobo 5D3,
disconnect the data cable and then the power cable. Let it cool down and then
restart.
Activity
Light
Blinking Green: Data is actively being transferred between your computer and
your Drobo device. Do not remove or add drives during this process.
Capacity
Gauge
Blue: Displays the percentage of your Drobo device that is full, in 10%
increments. There are 10 capacity gauge lights. So, for example, if your Drobo
device is 30% full, three blue lights display.