Drobo 5D3 - Checking Performance Information

Drobo 5D3 User Guide 101
● Critical (red) - Indicates that the drive is full and you need to add capacity now.
● Good (green) - Indicates that the drive is healthy and no action is needed.
Note:
In addition, if the drive is a Solid State Drive (SSD), the percentage of wear is
reported.
● Capacity - The drive size.
● Drive Type – Options include SSD or HDD.
● Drive Interface – The drive type. It can take one of the following values: SATA/SSD.
8.8 Checking Performance Information
1. In Drobo Dashboard on the All Drobos page, select the appropriate Drobo 5D3.
2. Click the Status option on the Navigation menu. The Status page opens.
3. Select the Performance option from the Status drop-down list to view the following
information:
● IOPS – The average IOPS value for the entire disk pack.
● Read Throughput – The average read throughput value for the entire disk pack,
measured in MB/s.
● Write Throughput – The average write throughput value for the entire disk pack,
measured in MB/s.