Drobo 5D3 User Guide 110
3. In the From E-mail Address text box, enter an e-mail address from which the alerts are
sent.
4. In the Mail Server text box, enter the server from which to send the alerts. This can be
specified as a server name (e.g., smtp.company.com) or a server’s IP address (e.g.,
127.0.0.1). If you are unsure, contact your network administrator or your e-mail service
provider.
Note:
If you are unsure, please contact your network administrator or e-mail service
provider.
Tip:
You can send a test message by clicking the Send Test E-mail button.
5. In the Port text box, modify the TCP/IP port through which your server expects SMTP
submissions, if needed. The default is 25.
To Next Page
Loading...
