Drobo 5D3 User Guide 39
1. Open the Drobo Dashboard on your computer and press the power toggle button on
the back of your Drobo device once. Your Drobo device powers on and appears on the
All Drobos page in Drobo Dashboard.
Note:
Some of the Windows and Mac operating systems will prompt you to format the
drives. Click Cancel or Ignore, as appropriate, and continue with formatting from
Drobo Dashboard.
2. Double-click on the Drobo 5D3 icon on the All Drobos page. A message appears,
asking if you would like to format the device.
3. Click the Yes button. The Format Type page opens. Depending on your operating
system the page displays with different options.
If you are using a Mac machine, the File Format page will appear as:
If you are using a Windows machine, the File Format page will appear as:
To Next Page
Loading...
