Drobo 5D3 - Page 76

Drobo 5D3 User Guide 76
You can choose to disable the Drobo shortcut in the system tray and later enable it at
any time. To enable/disable the system tray:
1. Open the Drobo Dashboard and click the Dashboard Preferences option on the
Navigation menu. The Dashboard Preferences page opens.
2. If the system tray feature is already enabled, then you will see a tick mark in the
Enable System Tray Application check box. If the tick is not present, then you can
enable the feature by selecting the Enable System Tray Application check box.
3. If you want to disable the system tray feature, then clear the Enable System Tray
Application check box.
Note:
If the system tray is disabled, on-screen alerts will not be displayed.