DSC MAXSYS PC4010 - DLS Options

14
SYSTEM AREA
DLS SECTION DLS TOGGLE S/DLS OPTION S/DLS REPORT CODES
DLS Options
Programming the time and number of days between periodic downloads. (See “Periodic DLS” for
enabling Periodic Downloading.)
Set Downloading Cycle Days?
Program the number of days (from 001 to 255 days) between periodic downloads. The default
setting is 030.
Set 24 Hour Time?
Program, in military time, the time of day the panel will call the computer for periodic
downloading. The default setting is 0000.
Downloading Phone Number?
Enter the telephone number for computer if User Call Up, Periodic DLS, or DLS Callback is
enabled. See “PGM TEL NUMBER” for entering a telephone number and options when
programming the phone number.
Panel Identifier Code?
This four digit code will allow the computer to identify the panel that is calling. It must be
programmed differently for every panel if User Call Up, Periodic DLS or DLS Callback is used.
The default setting is 4911.
Panel Downloading Access Code?
This 4 digit code must be programmed the same as the computers. If the code is different the
panel will NOT allow any uploading or downloading to take place. It is used to help ensure the
security of the system. The default setting is 4910.
Double Call Timer?
This is the maximum allowable time in seconds between two phone calls when the “Double Call”
option has been enabled. Valid entries are between 000 and 255 seconds. The default setting is
060. (See “Double Call” for enabling the double call feature.)
Number of Rings?
This is the number of consecutive rings the panel must detect before answering the call. (See
“DLS Enable” or “User Enabs DLS” for enabling DLS Enable.) Valid entries are between 001 and
255 rings. The default setting is 008.
PERIODIC CALLUP
(1)
SET CYCLE DAYS
(0)
# OF RINGS
(6)
2 CALL TIMER
(5)
ACCESS CODE
(4)
PANEL ID CODE
(3)
PHONE NUMBER
(2)
SET 24HR TIME
(1)