DSC MAXSYS PC4010 Programming Manual

3
PROGRAMMING
MANUAL
The PC4010 Installer’s Programming is broken down into 5 major sections:
System Area For programming options which affect the operation of the entire system. For example communications,
downloading, printer options etc. are options which affect the overall system and are programmed in the system area.
Partition Area For programming options which pertain to individual partitions. For example the zone assignment, entry
delay time and exit delay time are all options which can be programmed for each of the partitions.
Module Hardware For enrolling and deleting modules.
Event Buffer For the installer to reprint the entire event buffer.
Diagnostics For viewing trouble conditions reported by the modules.
Page
SYSTEM AREA
þ
INSTALLER OPT’S __________________________________________ 4
(0) (00)
þ
EVENT MESSAGES __________________________________________ 5
(01)
þ
SYSTEM OPTIONS __________________________________________ 7
(02)
þ
DLS SECTION __________________________________________ 13
(03)
þ
COMMUNICATOR __________________________________________ 15
(04)
þ
SW AUX OUTPUT __________________________________________ 34
(05)
þ
MAIN BELL OUTPUT __________________________________________ 35
(06)
þ
PGM OUTPUTS __________________________________________ 36
(07)
þ
PC4400 OPTIONS __________________________________________ 41
(08)
þ
SYSTEM LABEL __________________________________________ 44
(09)
þ
EVENT SCHEDULING __________________________________________ 45
(10)
PARTITION AREA
þ
ADD/EDIT PAR __________________________________________ 49
(1) (0)
þ
DELETE PARTITION __________________________________________ 56
(1)
þ
COPY PARTITION __________________________________________ 56
(2)
MODULE HARDWARE
þ
ENROLL MODULE __________________________________________ 57
(2) (0)
þ
DELETE MODULE __________________________________________ 58
(1)
þ
CONFIRM MODULE __________________________________________ 58
(2)
þ
RF ZONE OPTIONS __________________________________________ 58
(3)
EVENT BUFFER
þ
PRN ENTIRE BUFF __________________________________________ 61
(3) (0)
DIAGNOSTICS
þ
DIAGNOSTICS __________________________________________ 62
(4) (0)
þ
BINARY PROGRAM __________________________________________ 62
(1)
þ
MEMORIZE VBAT __________________________________________ 62
(2)
þ
FACTORY DEFAULT __________________________________________ 62
(3)
þ
DEFAULT 4580 __________________________________________ 62
(4)

DSC MAXSYS PC4010 Specifications

General

Brand	DSC
Model	MAXSYS PC4010
Category	Security System
Language	English