DSE 335 - 4 DESCRIPTION OF CONTROLS; 4.2.2 S1; 4.2.3 S2; 4.2.4 MODULE

Description of Controls
Page 49 of 90 057-233 ISSUE: 1
4.2.2 S1
Contains electrical values of S1 measured or derived from the module’s voltage and current inputs.
• S1 Configuration
• S1 State
• S1 Summary
• S1 Voltage (ph-N)
• S1 Voltage (ph-ph)
• S1 Frequency
• S1 Current
• S1 Earth Current
• S1 Load (ph-N kW)
• S1 Load (Total kW)
• S1 Load (ph-N kV A)
• S1 Load (Total kV A)
• S1 Power Factor
• S1 Power Factor Average
• S1 Load (ph-N kvar)
• S1 Load (Total kvar)
• S1 Load (kW h, kV A h, kvar h)
4.2.3 S2
Contains electrical values of S2 measured or derived from the module’s voltage and current inputs.
• S2 Configuration
• S2 State
• S2 Summary
• S2 Voltage (ph-N)
• S2 Voltage (ph-ph)
• S2 Frequency
• S2 Current
• S2 Earth Current
• S2 Load (ph-N kW)
• S2 Load (Total kW)
• S2 Load (ph-N kV A)
• S2 Load (Total kV A)
• S2 Power Factor
• S2 Power Factor Average
• S2 Load (ph-N kvar)
• S2 Load (Total kvar)
• S2 Load (kW h, kV A h, kvar h)
• Load Control
4.2.4 MODULE
Contains information on the module configuration.
• S1 Configuration
• S2 Configuration
• Date and Time
• Battery Voltage