DSE Model 560 Automatic Start Engine Management and Instrumentation System Operators Manual
560 OPERATING MANUAL ISSUE 5 4/4/02 MR 35
12.4 INPUT EXPANSION
It is possible to increase the number of monitored inputs available by utilising a DSE 54x Protection
Expansion/Annunciator. Please refer to our Technical department for details.
12.5 STANDBY GENERATING SET?
The 560 needs to be given a remote start to start up. This can be supplied from a Mains
monitoring module to make the gen-set start up automatically should the mains fail. The 560
module may be used in conjunction with either the basic 500 ATS controller or the more complex
530 ATS controller. These not only monitor the mains and issue a start command to the 560, they
also provide control of the contactors or other changeover devices. Please refer to our Technical
department for details.
Model 500
Deep Sea
Electronics plc
12.6 NEED MORE FUNCTIONS?
The 560 module can easily be upgraded with a 550 controller. It has exactly the same mounting
and uses exactly the same rear connectors. Upgrading takes seconds and instantly provides
functions such as telemetry, two stage alarms on monitored values, exercise scheduler, enhanced
metering and many more features. Please refer to our Technical department for details.
To Previous Page
Loading...
