DSE Model 560 Automatic Start Engine Management and Instrumentation System Operators Manual
560 OPERATING MANUAL ISSUE 5 4/4/02 MR 5
INTRODUCTION
The DSE 560 Module, has been designed to allow the OEM to meet most of the industry’s complex
specifications. It has been primarily designed to allow the user to start and stop the generator, and
if required, transfer the load to the generator either manually (via external push-buttons) or
automatically. The user also has facility to view all the system operating parameters via the LCD
display.
The DSE 560 module monitors the engine, indicating the operational status and fault conditions;
automatically shutting down the engine and giving a true first up fault condition of an engine failure
by a flashing COMMON ALARM LED. Exact failure mode information is indicated by the LCD
display on the front panel.
The powerful Micro-processor contained within the module allows for a range of complex features
to be incorporated as standard;
• Graphical Icon based LCD display (excluding the need for translations and languages).
• Voltage and Current monitoring.
• Engine parameter monitoring.
• Fully configurable inputs for use as alarms or a range of different functions.
• Extensive range output functions using built in relay outputs or relay expansion available .
Selective operational sequences, timers and alarm trips can be altered by the customer via a PC
using the P808 for Window™ software and 808 interface.
Access to critical operational sequences and timers for use by qualified engineers, are barred by a
security code.
The module is housed in a robust plastic case for the front panel mounting. Connections to the
module are via locking plug and sockets.
CLARIFICATION OF NOTATION USED WITHIN THIS PUBLICATION.
NOTE:
Highlights an essential element of a procedure to ensure
correctness.
CAUTION!:
Indicates a procedure or practice which, if not strictly observed,
could result in damage or destruction of equipment.
WARNING!:
Indicates a procedure or practice which could result in injury to
personnel or loss of life if not followed correctly.
ã
ãã
ã
Deep Sea Electronics Plc owns the copyright to this manual, which
cannot be copied, reproduced or disclosed to a third party without
prior written permission.
Compliant with BS EN 60950 Low Voltage Directive
Compliant with BS EN 50081-2 EMC Directive
Compliant with BS EN 50082-2 EMC Directive
Year 2000 Compliant
To Next Page
Loading...
